Fire Escape Compliance Checker | NYC Fire Escape Painting
Building compliance assessment
Question 1 of 6
Question 1 of 6 0%
1. How tall is your building?
Building height determines which inspection rules apply to your fire escape.
2. How old is the building?
Older iron and steel fire escapes corrode faster and need closer monitoring.
3. When was the fire escape last inspected or serviced?
Includes any professional inspection, repainting, or repair work.
4. Do you see any rust, corrosion, or peeling paint?
Look at railings, stairs, platforms, and where the escape attaches to the wall.
5. Any loose railings, cracked welds, or damaged platforms?
Structural issues are the most serious — they can be classified as immediately hazardous.
6. Do you currently have any open DOB violations?
Check the DOB BIS portal under your property's address if you're unsure.
Compliance risk score
Low riskModerateHigh risk
What we found
Your recommended next steps
Get a professional fire escape inspection
DOB-licensed · Free estimate · Most assessments scheduled within 2–5 days
Call (347) 384-5103
Disclaimer: This checker provides a general, informational risk assessment based on the answers you provide and NYC DOB / FISP (Local Law 11) requirements. It is not a substitute for a professional on-site inspection by a licensed contractor or qualified engineer, and does not constitute a legal compliance determination. Actual requirements depend on your building's specifics, classification, and current code.

Frequently Asked Questions

Fire escape compliance depends on your building's height, the condition of the escape, and your inspection history. Buildings over six stories must comply with FISP (Local Law 11) inspection cycles; all buildings must keep their fire escapes structurally safe and free of significant corrosion or damage. The compliance checker above gives you a personalized risk assessment in about a minute, and a licensed contractor can confirm with an on-site inspection.

Yes, for buildings taller than six stories. Local Law 11 / the Facade Inspection Safety Program (FISP) requires periodic inspection of a building's exterior, including fire escapes, by a qualified professional on a five-year cycle. Buildings six stories and under are exempt from FISP filings but still must maintain their fire escapes in safe condition.

Buildings subject to FISP follow the program's recurring five-year inspection cycle. For all buildings, a professional inspection and repainting every few years is a sound practice — older iron and steel fire escapes benefit from more frequent attention because they corrode faster.

A fire escape violation from the DOB carries a base penalty plus daily accrual that begins after a cure period, escalating toward an OATH/ECB hearing if left unaddressed. The fastest way to limit exposure is to begin documented correction work with a licensed contractor and file a Certificate of Correction. You can estimate your potential exposure with our DOB Violation Risk Calculator.

You can do a useful preliminary self-assessment — which is exactly what the checker above provides — by evaluating your building height, the escape's age and condition, your inspection history, and your violation status. However, only a licensed contractor or qualified professional can perform an official inspection and certify compliance.

Cost depends on the building's height and the scope of work — a basic inspection and repaint is far less than structural restoration. NYC Fire Escape Painting provides free on-site estimates. Most routine painting and rust-remediation projects in Manhattan range from $1,500–$4,500 depending on the building.

ask what you want to ask